Product ID:280 ADHESIVE
MSDS Date:02/09/1989
FSC:8040
NIIN:00F031088
MSDS Number: BSMPJ

UNCOMMON CONGLOMERATES INC

287 E 6 STREET SUITE 610
ST PAUL, MN 55101
US

Emergency Phone: 800-228-5635

Info Phone: 612-227-7000

Cage: 0AW86

UNCOMMON CONGLOMERATES INC

ST PAUL, MN 55103-2257 US

Telephone: 651-227-7000/800-323-4545

Cage: 0AW86

HYDROQUINONE, 1,4-DIHYDROXYBENZENE, 1,4-BENZENEDIOL

CAS: 123-31-9

RTECS: MX3500000

Fraction By Weight: <0.5%

OSHA PEL 2 MG/CUM

ACGIH TLV: 2 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ETHYL-2-CYANOACRYLATE *93-3*

CAS: 7085-85-0

Fraction By Weight: >95%

BUTYL ACRYLATE, METHACRYLIC ACID, METHYL METHACRYLATE

CAS: 25035-69-2

Fraction By Weight: <5%

LD50 LC50 Mixture:ORAL LD50 (LAB ANIMAL): >5000 MG/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:BONDS SKIN RAPIDLY & STRONGLY. SKIN &
EYE IRRITANT. ADHESIVE WILL ATTACH TO EYE PROTEIN, WILL
DISASSOCIATE OVER INTERMITTANT PERIODS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:ADHESIVE ON EYE PROTEIN WILL CAUSE WEEPING &
DOUBLE VISION OF LACHRYMATORY EFFECT.

First Aid:INGESTION: SALIVA WILL LIFT ADHESIVE IN 1/2 TO 2 DAYS.
POSITION PATIENT TO PREVENT INGESTION WHEN IT DETACHES. SKIN: SOAK
IN SOAPY WATER. PEEL/ROLL SURFACES APART. DON'T PULL APART. USE
SAFETY SOLVENT . EYES: WASH W/WARM WATER/APPLY GAUZE PATCH. WILL
OPEN IN 1-4 DAYS. DON'T TRY TO OPEN BY MANIPULATION. INHALATION:
REMOVE TO FRESH AIR. TREAT SYMPTOMATICALLY. OBTAIN MEDICAL
ATTENTION. (SEE SUPP).

Flash Point Method:TCC
Flash Point:>200F
Extinguishing Media:CO2, FOAM, OR DRY CHEMICAL
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT INCLUDING SCBA.
USE WATER SPRAY TO COOL BURNING SURFACES & EXCLUDE AIR.

Spill Release Procedures:FLOOD W/WATER TO POLYMERIZE. SOAK UP W/INERT
ABSORBENT.

Handling and Storage Precautions:STORE AT OR <75F TO MAXIMIZE SHELF
LIFE. AVOID CONTACT W/SKIN & EYES. AVOID BREATHING VAPORS.
Other Precautions:ALCOHOLS, AMINES, ALKALIES, & WATER CAUSE
POLYMERIZATION.

Respiratory Protection:MASK SUGGESTED (3M 8725)
Ventilation:LOCAL EXHAUST
Protective Gloves:POLYETHYLENE. DON'T USE COTTON.
Eye Protection:CHEMICAL SAFETY GOGGLES
Supplemental Safety and Health
EYEBALL: WILL DISASSOCIATE W/IN A MATTER OF HOURS.

Boiling Pt:B.P. Text:>300F
Vapor Pres:<0.2
Vapor Density: 3
Spec Gravity:1.05
Solubility in Water:POLYMERIZES
Appearance and Odor:CLEAR LIQUID, LOW PUNGENT ODOR.

Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOLS, AMINES, ALKALIES
Stability Condition to Avoid:TEMPS >75F

Waste Disposal Methods:POLYMERIZE AS ABOVE. LANDFILL OR INCINERATE IN
ACCORDANCE W/EPA & LOCAL, STATE, & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.